Contact Us
TEL : +86-592-6290507
E-mail : csmetal@aliyun.com
Address : 1-2F., 166, DuTian Rd., Jimei North Industrial Zone, Xiamen, Fujian, 361021 China
Home > News > Content
A Lot Of Advantage Of Stamping Parts
Jan 23, 2017

Stamping parts and castings, forgings, fights has the characteristic of thin, uniform, light and strong. Stamping can be produced with enhanced than master diameter is difficult to manufacture, rib flanging, front, or artifacts, in order to improve its stiffness. Rejected due to the rough mould, workpiece precision can reach micron grade, and high precision, specification is consistent, can punching a hole nest, convex sets, etc. In actual production, commonly used to approximate the manufacturability of stamping process test, such as deep drawing performance test, bulging performance test and other test materials stamping performance, to ensure the quality of the finished product and high qualified rate.
Stamping with besides plate with hydraulic press forming, usually take grinds to press. In this high-speed transfer grinds to press as the focus, set up the equipment configuration open book of finished product collection, walks, and quick mold library and placement of the mould, and use computer French bundles, can form high production rate of the passive stamping production line. In production dozens, hundreds of stampings per minute, in a short time to finish stamping, such as pieces of the process.