Contact Us
TEL : +86-592-6290507
E-mail :
Address : 1-2F., 166, DuTian Rd., Jimei North Industrial Zone, Xiamen, Fujian, 361021 China
Home > Exhibition > Content
Stamping die disassembling pin hole damage problem analysis
Jan 23, 2017

Stamping die during dismantling, there are a lot of details need to be aware of, a bit not careful will damage the components, such as: pin hole particularly easy to be damaged when disassembling mold, you know why?

Compensation trade is damaged when disassembling stamping die causes and solution of pin hole is as follows:

A clean, no pin hole is easy to damage

We can pin hole, pin wipe up, should be first dismantle positioning pin down the mold when loading, should use screw guide is, first after positioning pin hole.

Second, the mould installation procedure is not correct

Strike pin when the solution is: don't touch hurt pin hole

Three, pin hole wall hair, scrape the too tight set is die, carefully check whether the hair pin hole, otherwise should play not to come out, pin hole reaming afresh, pin hole deviation or no escape hole below, additional positioning pin hole.

A pin is indispensable in the process of dismantling stamping die parts, so we are dealing with the stamping die for installation or maintenance, it is important to note that the pin hole, not to damage it. 

Previous: CNC Lathe definition

Next: Tensile stamping mould care matters