Contact Us
TEL : +86-592-6290507
E-mail :
Address : 1-2F., 166, DuTian Rd., Jimei North Industrial Zone, Xiamen, Fujian, 361021 China
Home > Exhibition > Content
Progressive die stamping parts of the production
Jan 23, 2017

Stamping parts processing, has the characteristics of thin, uniform, light and strong stamping can make other methods are difficult to manufacture with reinforcing rib, rib, ups and downs or flanging stamping workpiece, improve its rigidity. Because use precision mould, workpiece precision can reach 0.01 mm, and repeat precision is high, the specification is consistent, can punch a hole nest, convex sets, etc.
Stamping parts stamping is mainly classified by technology, can be divided into two major categories of separation process and forming process. Separation process can also be called blanking, its purpose is to make from the sheet metal stamping parts along the contour line must be separated, and at the same time guarantee the quality requirements of the separation section.
Stamping parts stamping is efficient production methods, the use of multistep progressive die, can be done in a pressure on multichannel stamping process, realize the pick-up uncoiling, leveling, cutting to the forming and finishing of automatic production. High efficiency, good working conditions, low production cost, the general could make thousands of pieces per minute. Forming process is designed to make sheet metal under the condition of not to break the billet occurred plastic deformation, made into the required shape and size of the workpiece. In the actual production is often a variety of process integrated applied to an artifact. Cutting, bending, shear, deep drawing, bulging, spinning, correction is several main stamping process.

Previous: Tensile stamping mould care matters

Next: The function of the metal stamping pieces of shrapnel is introduced